top of page


  • Designed to notch and drill the underside of a drawer box for mounting undermount drawer slides
  • Pneumatic cutter & drill stroke by foot pedal operation.
  • Cutter stroke and drill speed are adjustable for optimum finish results
  • Drill will automatically position for both left and right drawer notches by activating a switch in the fence
  • Machine will not cycle unless a drawer is up against the switch for safe operation
  • Insert knife cutterhead with solid carbide inserts for optimum finish results and long tool life
  • 2 ¼” (57mm) wide cutter allows for a wide range of undermount slides
  • Comes with insert cutterhead with inserts and ¼” (6.3mm) solid carbide drill bit.
  • Capable of notching up to 220 drawer boxes (both left and right) per hour.



Main cutter motor3 HP
Notch dimensions2 ¼” (57mm) x 0.5” high
Cutter diameter10”
Drill diameter¼”
Table size49” x 22”
Table height from floor32”
Dust port4” (670 CFM requirement)
Compressed air required90 – 100 PSI
Machine dimensions48” x 37 ¾” x 39 ¾”
Machine weight506 lbs.


Machine Inclues

  • Solid carbide drill bit 1/4″ (6.3MM) 118o
  • 10” (255mm) x 2 ¼” (57mm) insert cutter head with 70 pcs. (14x14x2.0mm)

Cantek JEN60 Drawer Notcher- 3 PH


    Request a Quote

    Thanks for submitting!

    bottom of page