NT-CS24L UP CUT SAW LEFT HAND
NT-CS24L UP CUT SAW LEFT HAND
orCall 239-770-4474
Description
The NT CS24L Up Cut Saw is the first saw to step into the larger body frame. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. Left handed Up Cut Saws have the blade on the left side of the machine as you face the front of the machine and material is fed from the right to the left. Using a 24″ diameter blade the CS24 has a modest 2″x21″ cut capacity making it more user friendly for mid sized parts. This machine comes standard with stroke speed control, emergency stop, safety interlock on blade door, guarding, foot operation and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The CS24 has available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access.
The NT CS24L Up Cut Saw is the first saw to step into the larger body frame. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. Left handed Up Cut Saws have the blade on the left side of the machine as you face the front of the machine and material is fed from the right to the left. Using a 24″ diameter blade the CS24 has a modest 2″x21″ cut capacity making it more user friendly for mid sized parts. This machine comes standard with stroke speed control, emergency stop, safety interlock on blade door, guarding, foot operation and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The CS24 has available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access.
CUTTING ENVELOPE: 1'' x 21'', 2'' x 21-1/2'', 3'' x 20'', 4'' x 18-1/2'', 5'' x 16-3/4'', 6'' x 14-1/4'', 7'' x 11-1/4'', 6'' x 8''
Specifications
Manufacturer | Northtech Machine |
Condition | New |
Main motor hp | 15 HP |
Voltage, frequency | 230/460 Volt 60HZ |
Phase | 3 Phase |
Amp requirement | 16/32 Amps |
Control voltage | 24 Volt Control Voltage |
Assisted start | Wye Delta |
Pass-line | 34'' |
Max. working width | 21-1/2'' |
Max. working thickness | 8-3/8'' |
Arbor rpm | 2100 RPM |
Blade size | 24'' Tungsten Carbide Tipped |
No. of teeth on blade | 100 Tooth |
Tooth spacing | 5/8'' |
Blade kerf | .156'' |