NT-2ST5 DUST COLLECTOR

NT-2ST5 DUST COLLECTOR

orCall 239-770-4474

Description

NT-2ST5 DUST COLLECTOR The NT 2ST-5 is Northtech’s smallest cyclone dust collector. Cyclone style dust collectors use the speed of the air and the physics of centrifugal force to separate dust from the air. The natural cyclonic air flow allows clean air to pass through the center of the cyclone into the blower and through the secondary filter bag. A clean air mounted blower and steel cyclone design provides decades of dust separation without primary filter bags. The 2ST-5 cyclone and filter bag are supported by a steel frame structure that allows for the use of standard barrels for waste collection. NT-2ST5 DUST COLLECTOR The NT 2ST-5 is Northtech’s smallest cyclone dust collector. Cyclone style dust collectors use the speed of the air and the physics of centrifugal force to separate dust from the air. The natural cyclonic air flow allows clean air to pass through the center of the cyclone into the blower and through the secondary filter bag. A clean air mounted blower and steel cyclone design provides decades of dust separation without primary filter bags. The 2ST-5 cyclone and filter bag are supported by a steel frame structure that allows for the use of standard barrels for waste collection.

Specifications

ManufacturerNorthtech Machine
ConditionNew
Machine hp5 HP
Direct drive (motor)Direct Drive Motor
Voltage, frequency230/460 Volt 60Hz
Phase3 Phase
Amp requirement7.6 / 15.2 Amps
Total machine hp5 HP
Approved electrical partsCE Approved Components
Dual voltage motors230/460 Volt
Control voltage220 Volt
Dust port size inlet(1) 9'' Inlet
Free air cfm4100 CFM
Impeller15'' Impeller
Upper bags(1) 24” x 77-1/8”
Lower bags55 Gallon Drum (Not Included)
No. of barrel dollies(2) Barrel Dollies