NT-UCS14R UP CUT SAW RIGHT HAND

NT-UCS14R UP CUT SAW RIGHT HAND

orCall 239-770-4474

Description

The NT UCS14R Up Cut Saw is the baby of the Northtech Up Cut Saw family. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. Right handed Up Cut Saws have the blade on the right side of the machine as you face the front of the machine and material is fed from the left to right. Using a 14″ diameter blade the UCS14 has a capable 2″x10″ cut capacity in a small footprint making it the most user friendly model for small parts. The UCS series boasts some noteworthy features over competitive models with an improved dust collection system preventing the need for daily blow out under the machine and it also comes with a full length fence and backer to prevent blowout on the back side of the part. This machine comes standard with stroke speed control, emergency stop, safety switch, guarding, foot operation and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The UCS14 has several available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access. Cut Capacity 1” x 10” 2” x 9-1/4” 3” x 8” 3-1/2” x 5” The NT UCS14R Up Cut Saw is the baby of the Northtech Up Cut Saw family. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. Right handed Up Cut Saws have the blade on the right side of the machine as you face the front of the machine and material is fed from the left to right. Using a 14″ diameter blade the UCS14 has a capable 2″x10″ cut capacity in a small footprint making it the most user friendly model for small parts. The UCS series boasts some noteworthy features over competitive models with an improved dust collection system preventing the need for daily blow out under the machine and it also comes with a full length fence and backer to prevent blowout on the back side of the part. This machine comes standard with stroke speed control, emergency stop, safety switch, guarding, foot operation and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The UCS14 has several available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access. Cut Capacity 1” x 10” 2” x 9-1/4” 3” x 8” 3-1/2” x 5”

Specifications

ManufacturerNorthtech Machine
ConditionNew
Main motor hp7.5 HP
Voltage, frequency230/460 Volt 60 Hz
Phase3 Phase
Amp requirement18.4 / 9.2 Amps
Cutting envelope1'' x 10'', 3-1/2'' x 5''
Max. working width1'' x 10''
Max. working thickness3-11/16''
Arbor rpm3000 RPM
Blade size14'' Tungsten Carbide Tipped
No. of teeth on blade100 Tooth
Tooth spacing.40''
Blade kerf.125''
Dust collection requirement4'' Port @ 450CFM Optional 2nd Top Port
Cycles/minute95 Cuts Per Minute Adjustable
Hold down styleT Clamp