NT-610SC-I DOUBLE SURFACE PLANER

NT-610SC-I DOUBLE SURFACE PLANER

orCall 239-770-4474

Description

The NT 610SC-I is our most popular double surfacer. Double surfacers, some times referred to as 2 sided planers are used to size the thickness of wood and other dense materials such as plastic. The NT 610SC-I has a 24″ working width and an 8″ working height, making it an extremely versatile machine. The top and bottom helical cutter head uses two sided 30x12x2.5 carbide insert cutters for a moulder smooth finish, even with heavy stock removal. The powered top and bottom feed system is designed with (7) rollers integrated in the chrome bed and a spring loaded carpet spike infeed with a gearbox connected carden shaft drive. The carden shaft drive delivers a slack free feed with out the common chain adjustments. The jointer table infeed and overhead spring loaded carpet spike system allows this machine to not only size the thickness, but also straighten warped or crooked material. The top head is easily accessible for tooling changes by removing the dust hood and the bottom head pulls out of the machine completely in just a couple minutes for full access. The upper assembly is supported by a (4) column slide system that provides precision thickness sizing across the entire width and has digital thickness positioning control. Northtech Double surfacers are available in 16″-52″ working widths with up to a 24″ working thickness and can be offered with a safety/sound enclosure. The NT 610SC-I is our most popular double surfacer. Double surfacers, some times referred to as 2 sided planers are used to size the thickness of wood and other dense materials such as plastic. The NT 610SC-I has a 24″ working width and an 8″ working height, making it an extremely versatile machine. The top and bottom helical cutter head uses two sided 30x12x2.5 carbide insert cutters for a moulder smooth finish, even with heavy stock removal. The powered top and bottom feed system is designed with (7) rollers integrated in the chrome bed and a spring loaded carpet spike infeed with a gearbox connected carden shaft drive. The carden shaft drive delivers a slack free feed with out the common chain adjustments. The jointer table infeed and overhead spring loaded carpet spike system allows this machine to not only size the thickness, but also straighten warped or crooked material. The top head is easily accessible for tooling changes by removing the dust hood and the bottom head pulls out of the machine completely in just a couple minutes for full access. The upper assembly is supported by a (4) column slide system that provides precision thickness sizing across the entire width and has digital thickness positioning control. Northtech Double surfacers are available in 16″-52″ working widths with up to a 24″ working thickness and can be offered with a safety/sound enclosure.

Specifications

ManufacturerNorthtech Machine
ConditionNew
Top head hp40 HP
Bottom head hp30 HP
Voltage, frequency230/460 Volt 60HZ
Phase3 Phase
Amp requirement109 / 218 Amps
Feed hp5 HP
Feed systemCarpet Feed / Powered Rollers
Drive systemCardan Shaft Drive System
Feed speed range30-90 FPM
Variable feed speedInverter Controlled
Elevation hp1 HP
Elevation styleDP-626S Elevation Control
Elevation system(4) 3-1/4'' Geared Lifting Columns
Total machine hp76 HP
Approved electrical partsCE Approved Components