NT-ATS600 AUTOMATIC TURNING SANDER
NT-ATS600 AUTOMATIC TURNING SANDER
or
Call 239-770-4474
Description
The ATS600 is a high production capacity sander for varying shaped parts, often produced by a lathe. This model has a capacity of up to 24″ with larger models available.
The ATS600 is a high production capacity sander for varying shaped parts, often produced by a lathe. This model has a capacity of up to 24″ with larger models available.
Specifications
| Manufacturer | Northtech Machine |
| Condition | New |
| Machine hp | 8.625 HP |
| Voltage, frequency | 230/460 Volt 60HZ |
| Phase | 3 Phase |
| Amp requirement | 31/15.5 Amps |
| 1st head | 1/2 HP Brush Sander |
| 2nd head | 1/2 HP Brush Sander |
| 3rd head | 1/2 HP Brush Sander |
| Brush motor hp | 5 HP Spindle Turning Motor |
| Feed hp | 1/2 HP |
| Drive system | Rotating Turret |
| Feed speed range | 9-34 Parts Per Minute |
| Variable feed speed | Mechanical |
| Elevation hp | 1/2 HP Open Close Turret Motor |
| Total machine hp | 8.625 HP |
| Approved electrical parts | CE Approved Parts |