NT-760XL DOUBLE SURFACE PLANER
NT-760XL DOUBLE SURFACE PLANER
orCall 239-770-4474
Description
The NT 760XL is our 30″ chain drive double surfacer with 8″ thickness capability. Double surfacers, some times referred to as 2 sided planers are used to size the thickness of wood and other dense materials such as plastic. The top and bottom helical cutter head uses two sided 30x12x2.5 carbide insert cutters for a moulder smooth finish, even with heavy stock removal. The powered top and bottom feed system is designed with integrated chrome bed rollers and a chain driven spring loaded carpet spike infeed. The jointer table infeed and overhead spring loaded carpet spike system allows this machine to not only size the thickness, but also straighten warped or crooked material. The top head is easily accessible for tooling changes by removing the dust hood and the bottom head pulls out of the machine completely in just a couple minutes for full access. The upper assembly is supported by a heavy duty slideway system that provides precision thickness sizing across the entire width and has digital thickness positioning control. Northtech Double surfacers are available in 16″-52″ working widths with up to a 24″ working thickness and can be offered with a safety/sound enclosure.
The NT 760XL is our 30″ chain drive double surfacer with 8″ thickness capability. Double surfacers, some times referred to as 2 sided planers are used to size the thickness of wood and other dense materials such as plastic. The top and bottom helical cutter head uses two sided 30x12x2.5 carbide insert cutters for a moulder smooth finish, even with heavy stock removal. The powered top and bottom feed system is designed with integrated chrome bed rollers and a chain driven spring loaded carpet spike infeed. The jointer table infeed and overhead spring loaded carpet spike system allows this machine to not only size the thickness, but also straighten warped or crooked material. The top head is easily accessible for tooling changes by removing the dust hood and the bottom head pulls out of the machine completely in just a couple minutes for full access. The upper assembly is supported by a heavy duty slideway system that provides precision thickness sizing across the entire width and has digital thickness positioning control. Northtech Double surfacers are available in 16″-52″ working widths with up to a 24″ working thickness and can be offered with a safety/sound enclosure.
Specifications
Manufacturer | Northtech Machine |
Condition | New |
Top head hp | 40 HP |
Bottom head hp | 30 HP |
Voltage, frequency | 230/460 Volt 60HZ |
Phase | 3 Phase |
Amp requirement | 95 / 190 Amps |
Feed hp | 5 Hp. |
Feed system | Carpet Feed / Powered Rollers |
Drive system | Chain Drive |
Feed speed range | 20-70 FPM |
Variable feed speed | Inverter Controlled |
Elevation hp | 1 HP |
Elevation style | GTM-525-A Digital Controller |
Elevation system | (4) Post Jack Screw |
Total machine hp | 76 HP |
Approved electrical parts | CE Approved Components |