NT-CS30R UP CUT SAW RIGHT HAND
NT-CS30R UP CUT SAW RIGHT HAND
orCall 239-770-4474
Description
The NT CS30R Up Cut Saw is the second largest cross cut saw we offer. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. Right handed Up Cut Saws have the blade on the right side of the machine as you face the front of the machine and material is fed from the left to the right. Using a 30″ diameter blade the CS30 has an impressive 2″x27″ cut capacity making it the right saw for mid size to larger sized parts. This machine comes standard with stroke speed control, emergency stop, safety interlock on blade door, guarding, foot operation and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The CS30 has available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access.
The NT CS30R Up Cut Saw is the second largest cross cut saw we offer. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. Right handed Up Cut Saws have the blade on the right side of the machine as you face the front of the machine and material is fed from the left to the right. Using a 30″ diameter blade the CS30 has an impressive 2″x27″ cut capacity making it the right saw for mid size to larger sized parts. This machine comes standard with stroke speed control, emergency stop, safety interlock on blade door, guarding, foot operation and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The CS30 has available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access.
CUTTING ENVELOPE: 1'' x 24-3/4'', 2'' x 24-1/4'', 3'' x 23-3/4'', 4'' x 23'', 5'' x 22-1/4'', 6'' x 21'', 7'' x 18-3/4'', 8'' x 16'', 9'' x 12-1/4'', 4'' x 10-1/4''
Specifications
Manufacturer | Northtech Machine |
Condition | New |
Main motor hp | 15 HP |
Voltage, frequency | 230/460 Volt 60 HZ |
Phase | 3 Phase |
Amp requirement | 16/32 Amp |
Approved electrical parts | CE Approved Components |
Dual voltage motors | 230/460 Volt |
Control voltage | 24 Volt |
Assisted start | Wye Delta |
Pass-line | 36'' |
Max. working width | 25'' |
Max. working thickness | 10-1/4'' |
Arbor rpm | 1600 RPM |
Blade size | 30'' Tungsten Carbide Tipped |
No. of teeth on blade | 120 Tooth |