CDM60

16" Compound double end trim mitre saw The CTD Model CDM60 offers a maximum of flexibility and cutting capacities. Specifications Compound double end trim mitre saw 3 H.P. 3 phase Magnetic Starter 10 strokes per min. Cutting Capacity 45°: 4" X 7¼" 90°: 4" X 10½" Blade Capacity 16" OD (406mm); saw blades not included. Arbor 1" (25mm) with 3-1/2" (89mm) saw collars; mounted on preloaded and sealed bearings; 2-belt drive centered between bearings; 2800 RPM of spindle. Motors & Voltages Two 3 H.P. 3 Phase 230/460 Totally Enclosed Fan Cooled Motors, 60 Hz, 1725 RPM with starters; 5 H.P. motors available; consult factory for amperage ratings. Iron Castings Saw arms, pivot brackets, and tables are precision machined and ground iron castings with milled keyways in table to guide fences. Cutting Capacity 90° Cutting; 4" (102mm) High x 10-1/2" (267mm) Wide 45° Mitre; 4" High (102mm) x 7-1/4" (184mm) Wide 90° Front to Back/45° Compound; 2-5/8" (67mm) High x 10" (254mm) Wide Refer to price list CTD Double End Trim Mitre & Compound Mitre Saws for additional cutting capacities. Table Tables swivel from 90° to 45° toward each other with degree markings and pointer; stops are at 90° and 45°; angular adjustment in opposite direction available. Floor Stand Heavy gage steel; eight foot (2.4M) centers with traveling right hand carriage on rack and pinion; length measuringscale; optional length centers available to 40 feet (12M); Digital Length Measurement available as optional accessory. Fences Inside and outside fences are keyed to base and are easily adjustable front to back, and side to side. Actuation Two inside vertical clamps must be tripped by foot valve, then a two-hand anti-tie down, maintained contact safety control will work the air downfeed of saw heads; an air filter/regulator/lubricator with auto drain is provided. Air Pressure & Consumption 4 CFM at 75 PSI (.11 cubic meters at 5.2kg/cm2); based on 10 strokes per minute. Production Rate 10 strokes per minute; actual production rates will vary with type and width of material to be cut. Size & Weight 40" (102cm) front to back x 69" (175cm) High x 120" (305cm) Long; Weight 1,500 lbs. (680kg).