M25R

12" Mitre cut-off saw This rugged, accurate heavy duty industrial indexing mitre cut-off saw uses our time tested 200 series sawhead. It will mitre up to 45 degrees each side of 0 degrees, with positive pin stops at 90, 45, 30, 22½, 15, 0. Blade Capacity 12" OD 305mm standard. Spindle & Pivot Shaft Have preloaded, sealed ball bearings; .001 alignment of spindle and pivot. Arbor is 1" 25.4mm OD with 2-1/2" 64mm saw collars; 3700 RPM. Motors 2 H.P. 1 or 3 Phase totally enclosed fan cooled with manual starter; enclosed 2-belt drive. Iron Castings Base & disc are made from precision machined iron castings for lasting accuracy. Disc is set flush with table and graduated each degree. Maximum Cutting Capacity M25R/45° 12" Blade Capacity 305mm 2-5/8"67mm High x 4-1/4" 108mm Wide M25R/90° 12" Blade Capacity 305mm 2-1/2"64mm High x 7-1/2" 191mm Wide Blade Guard Completely encloses blade in rest position.Lower rotating blade guard pivots up into main stationary blade guard as saw heads pivot down to cut. Actuation Manual hand operation; optional power feed of saw head. Dust Outlet Two 2" dust outlet provided. 600 CFM required for each. Size & Weights 22" 56cm Wide x 27" 69cm Front to Back x 22-1/2" 57cm High. Weight 195 lbs.89 kgs. Cutting Capacity with fences Set at center line M25R/45° 2-1/2"64mm High x 3-1/2"89mm Wide M25R/90° 2-1/2"64mm High x 5"127mm Wide Optional Extras include Power Downfeed of Saw, Clamps, Magnetic Starters, Floor Stand, Measuring Fences, and Table Supports.